View Single Post
Old 01-26-2014, 05:44 PM   #52
Making Volvo Parts Fit
lookforjoe's Avatar
Join Date: May 2008
Location: Rockland County, NY

Modified the stock runners instead - the custom required too many angle alignments at the same time to fit - I found that the runner / plenum flanges are also offset in two planes.

55mm on center per pair, 135mm between pairs.

Honda fuel rail will need three out of four ports drilled. Going to weld an AN06 bung for the fuel line. Using 98 V70 FPR in pod - so only regulated pressure to rail, and return safer/simplified as a result.

My XR July2013 - 446AWHP @ 8K rpm C30 AWD conversion Feedback Thread

Last edited by lookforjoe; 06-03-2018 at 09:58 PM..
lookforjoe is offline   Reply With Quote