home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Thread Tools Display Modes
Old 10-10-2019, 07:32 PM   #1
Board Member
Join Date: May 2017
Location: Eldorado Springs Mo.
Default innovative M. boost/tach

Hooked new innovative motorsports vacuum/rpm gauge. I ran my single tach wire from my gauge to the other tach wire on the instrument panel. The guage will only flash red when I rev it up? I guess I should of ran with wire to the coil but thought this would accomplish the same thing. Any thoughts from anybody.
Found a user manual online. You have to use software to change settings. Oh well, thought Id never be using a computer on my car but have to start somewhere.

Last edited by 90volvo; 10-10-2019 at 10:19 PM.. Reason: placed in wrong forum
90volvo is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 11:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.