Thanks for all your suggestions! I'll keep futzing with the carbs, do a comp test and lower my base timing from 16 degrees to 10-12.
My rebuilt head has stock everything so I'm more concerned about valve float at redline than a flat cam lobe, and it's the iPd Isky cam so not a huge amount of lift.
I may also just have to keep running it until the gas is at 100%
The jets slide smoothly and are spring loaded properly in place
My rebuilt head has stock everything so I'm more concerned about valve float at redline than a flat cam lobe, and it's the iPd Isky cam so not a huge amount of lift.
I may also just have to keep running it until the gas is at 100%
The jets slide smoothly and are spring loaded properly in place
Last edited: