hey guys so I'm stuck with my motor swap. b230ft from a 91 940se into my current 93 240. motor is in and cranks. I have power to the coil and power out but nothing out the brand new distributor. I also do not have fuel (do not hear the fuel pump kick on and no power @ fuse #4 before the fuel pump).I do have a code @ the engine code reader 2-2-4. not much info on this fault code, calls it a ground fault or engine coolant temp fault. I verified all the grounds are hooked up and at this point am kind of stumped. looking for any info I can get! thanks