home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-18-2021, 01:05 PM   #1
I do my own stunts
smoothdurban's Avatar
Join Date: Jan 2013
Location: LaSalle ON
Default LH2.4 CEL Output

Hey Guys

After performing a Kjet to LH2.4 conversion on my 83 242 I would like to have a way to illuminate a light if a fault code is thrown.

Looking at the pinouts from the ECU and ICU I see that ECU pin 22 and ICU pin 3 are the signal output from either module when a fault code is registered.

My question is does anyone know what output this signal is? Does in provide +12VDC when a code is thrown or does it switch to ground? Or something else?

Thanks in advance.
1983 242 Turbo w Tremec T5 154,000 km's B230FT LH2.4

2019 VW Golf R w 6 Speed w 2020 kms NEW DD

@smoothdurban on IG
smoothdurban is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 12:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.