VB242
I.M. Weasel
- Joined
- Sep 21, 2011
- Location
- Driving the No Malarkey Bus
So I'm pretty disgustilated, I had my freshly rebuilt B23 with 530 head all the way installed when I filled it up with water, which kept mysteriously disappearing. Turns out out was all in the oil pan. Is this block just forked or did the machinist or I make some kind of error? I used an Elring HG with ARP studs. I'm going to pull it back out and see what there is to see I reckon, I wasted my whole weekend putting it together.