leecatd8209
The Fourfather
- Joined
- Jul 1, 2015
- Location
- Reading, PA
Got the engine swap all buttoned up and now I have no spark. I've got power to the coil, power and ground at the power stage, and I swapped in the power stage from my running 240 with no change. No spark out of the coil.
The hall sender is plugged in, and it ran before I did the swap.
I'm fairly certain the distributor was under water during a recent flood, but even if the hall sensor was bad I should still have spark from the coil, no?
Thanks in advance for any assistance.
The hall sender is plugged in, and it ran before I did the swap.
I'm fairly certain the distributor was under water during a recent flood, but even if the hall sensor was bad I should still have spark from the coil, no?
Thanks in advance for any assistance.