home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-15-2021, 04:23 PM   #1
Join Date: Oct 2020
Default New Genuine Volvo Maf sensor same old tests?

Does anyone have any experience with the new Genuine Volvo MAF sensors with P/N 8251497 that are supposed to be a direct replacement for the Bosch 0 280 212 016?
I was wondering if the same Bentley manual tests apply to these new units when diagnosing the sensor because I'm on my 2nd unit from FCPeuro and both seem to be faulty according to the bentley tests for LH-2.4 as well as my old Bosch maf working perfectly when swapped out with these new maf sensors I've ordered on the car.

The reason I'm asking is because the bentley manual says pins 2 and 3 on the sensor should have 2.5-4 ohms but both of the new Volvo sensors show no continuity and infinite resistance unlike my Bosch sensor which shows 3.0 ohms just as the bentley suggests. My car stalls out everytime with the new Genuine Volvo sensors but drives fine with each Bosch maf I have.

Any insight? Is there something im missing with the new sensor that replaced the old Bosch part such as a different harness or something more in depth im supposed to replace with the new sensor? The pins don't seem do do the exact same things as the Bosch sensors pins. My car is a 1992 240 DL B230f N/A.

Thank you
Klech is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 12:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.