D5244T intercangable DMF?

Hey,
(this might also be in the maintenace formu, no idea really)
I have a D5244T2 witch is to what i hear a downtuned(130hp) version of the d5244T (163hp) wich is a downtuned 185hp engine.
(worrect me if i'm wrong)

I'm planning on getting it chiptuned to 185hp, so nothing to fancy, but since I'm changing my clutch an DMF i was wondering if i should install the D5244T3/4/5 ones instead of the D5244T2? will they fit withouth other mods?

I was planning on bying LUK parts (nothing to fancy for me)
D5244T2 parts
Clutch
-Luk: 624 3154 33
DMF
-Luk: 415 0220 10

D5244T3/4/5 parts
clutch
-Luk: 624 3256 34
DMF
-Luk: 415 0315 10

also, other things i should replace when down there?

If you buy the whole pack including DMF it is interchangeable yes. If you are using an internal hydraulic clutch bearing I would suggest to replace that at the same time.

The diesel history is a bit confusing. Specs change yearly if not faster. The old, first, D5 is basically the same as the 130 HP version. The 185 HP is somewhat different. Later on I believe the 163 HP 2.4 was a down tuned 185 HP D5 engine.

185 have difference with 163 : different intake mani (flaps in mani)
163 and 130 are absolutly identical

If you are doing any tuning at all, or towing I would not use a DMF.