home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Reply
 
Thread Tools Display Modes
Old 05-07-2021, 07:18 AM   #1
lookforjoe
Making Volvo Parts Fit
 
lookforjoe's Avatar
 
Join Date: May 2008
Location: Rockland County, NY
Default 91 745 Regina NA Driveshaft type

Looking through the late catalog, there are the three DS types, 03 (large bearing 183265) 13 (smaller bearing 181549) and 03 Giubo.

Do late NA's still use the smaller DS, or do they also use the type 03 like the turbos?

Looking online, there seems to be no PN or supply for the smaller OD bearing carrier (to go with 181549 bearing). EDIT - found IPD carries it - 1209820)

I'm of course hoping mine has the 03, since I'm going to +T anyway. Anyone know which came with the late NA cars? I can't remember at all. Older NA's used to use the type 02 which is not listed in the catalog for 91.

I'd like to figure this out ahead of crawling under the wagon if possible
__________________

My XR July2013 - 446AWHP @ 8K rpm C30 AWD conversion Feedback Thread

Last edited by lookforjoe; 05-07-2021 at 08:09 AM..
lookforjoe is offline   Reply With Quote
Old 05-07-2021, 03:29 PM   #2
dl242gt
Happy playing the blues
 
dl242gt's Avatar
 
Join Date: Jun 2002
Location: S NJ, a suburb of Phila.
Default

Well the car is also a wagon. The heaviest version of the body. So that being it's a late model I would guess that it's the large bearing. There should be a data plate on the car with the driveshaft type on it. Usually, the plate has alternator, power steering, calipers type, all the originally installed parts to the car.
__________________
Dave,
1982 242 turbo. 338k miles. MVP coilovers and 3" exhaust. Flowed 405 with a V15. Cossie turbine housing with upgraded compressor housing. 90+, IPD remote oil filter. Some other goodness, too. Been lots of fun over 25 years. Restored in 2k. Now ready for a 2nd restoration.

1993 245 Classic, 435k miles, enem V15. IPD bars and chassis braces. Simons sport exhaust from Scandix. sbabbs ezk chip. Been a good road warrior. Genuine Volvo rebuilt leaky M47.
dl242gt is offline   Reply With Quote
Old 05-07-2021, 09:27 PM   #3
lookforjoe
Making Volvo Parts Fit
 
lookforjoe's Avatar
 
Join Date: May 2008
Location: Rockland County, NY
Default

Quote:
Originally Posted by dl242gt View Post
Well the car is also a wagon. The heaviest version of the body. So that being it's a late model I would guess that it's the large bearing. There should be a data plate on the car with the driveshaft type on it. Usually, the plate has alternator, power steering, calipers type, all the originally installed parts to the car.
One would think. The service plate doesn't include DS - just steering gear, alt, brakes, trans, clutch, market, chassis type & option.

I'll have to get under there & measure the offset.
lookforjoe is offline   Reply With Quote
Old 05-08-2021, 02:55 PM   #4
dl242gt
Happy playing the blues
 
dl242gt's Avatar
 
Join Date: Jun 2002
Location: S NJ, a suburb of Phila.
Default

Sorry, didn't mean to mislead you. It should be the large bearing is still my thought.

Love your XR and C30 projects!
dl242gt is offline   Reply With Quote
Old 05-08-2021, 08:12 PM   #5
lookforjoe
Making Volvo Parts Fit
 
lookforjoe's Avatar
 
Join Date: May 2008
Location: Rockland County, NY
Default

Quote:
Originally Posted by dl242gt View Post
Sorry, didn't mean to mislead you. It should be the large bearing is still my thought.

Love your XR and C30 projects!

I have a spare large bearing/carrier DS I can refurbish if it is.

Thank you.
lookforjoe is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 02:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.