home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-12-2022, 01:51 PM   #1
dl242gt
Old and boxy but good.
 
dl242gt's Avatar
 
Join Date: Jun 2002
Location: S NJ, a suburb of Phila.
Default Spark plug gapping tool

Check out this Bosch Spark Plug gap setting tool. https://www.boschoffhighway.com/xc/e...ndustrial.html

I think if you put a sleeve on the threads of a 14mm spark plug you could use it. I can't
find a price. I guess it's priced appropriately for an industrial tool. Made for Iridium
plugs as well.
__________________
Dave,
1982 242 turbo. 338k miles. MVP/ BNE coilovers and 3" exhaust. Flowed 405 with a V15T. Cossie turbine housing with upgraded compressor housing. With wildly uncontrolled wastegate. 90+, IPD remote oil filter. Some other goodness, too. Restored in 2k. Now ready for a 2nd restoration.

1993 245 Classic, 440k miles, enem V15. IPD bars and chassis braces. Simons sport exhaust from Scandix. sbabbs ezk chip. Been a good road warrior. Genuine Volvo rebuilt leaky M47.
dl242gt is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 12:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.