home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Thread Tools Display Modes
Old 09-06-2022, 07:45 PM   #1
Board Member
sbabbs's Avatar
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default 90 plus turbo headgasket replacement trick to know!

Take out this one stud then you can take off head and put back without touching turbo or manifold, it just stays in place there. Granted if you do not take out this one stud you can but you tweak the manifold holding bracket and scratch the bottom of the head on the alignment dowls...

See how tight the hole around that one stud is compared to all the rest? That is the alignment stud hole! Follow me for more pro tips....


Ohh also my efn email is done.. I got outlook email simonbabbs at outlook.cum
1988 245 White slicktop M47 Wagon! 93 b230f. LH 2.4 STS flat flywheel.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 555K
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.
1995 940 White racing wagoon. 13c.
sbabbs is offline   Reply With Quote
Old 09-06-2022, 08:33 PM   #2
Board Member
Join Date: Mar 2013
Location: Florida

very nice !
---1991 volvo 745 turbo wagon
**m47 swap incoming !

--1977 244 360k+ miles all original
** drive till wheels fall off
whatshouldido is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 01:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.