Whiteblock Flywheel Bolts

This question relates 960 B6254 engine in my 240 with V70 single mass flywheel and an 850R clutch.

I'm wanting to replace the flywheel bolts when I change the flywheel from the dual mass to the single mass. The only volvo part number I have is 9454743.

Anyone know whether the dual mass whiteblock flywheel takes the same bolts as the single mass??

I used to use volvoem.com for searching out part numbers for this sort of stuff. Is there a similar or equivalent online resource or do I need to get one of the parts CDs off ebay??

Any help greatly appreciated?

Cheers

Liam Mc

If you look on the Volvo parts site: https://www.volvopartswebstore.com/...78&ukey_trimLevel=24645&searchString=flywheel

EDIT - meant to link the VCNA parts site: https://usparts.volvocars.com/a/Vol..._51507_7338226/Crank-mechanism/GR-423632.html

That is the correct number for the SMF used on NA 850's.

Make sure you buy the correct driver - I used the Matco version - CQ12M2

Thanks for the help

The WB flywheel bolts I bought look like they need a 11mm XZN bit...the 12mm I bought is too big.
The CQ12M2 driver p/n listed above is 12mm.
11mm is certainly not a common size, but looks like Amazon has one.
A T55 driver fits, but I'd like to use the correct tool.

*EDIT: don't assume the tool is correct.
I bought another 12mm XZN bit and it fits just fine.

Fair warning, this bit may or may not work: