home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-09-2021, 08:40 AM   #17
Jerd
Board Member
 
Jerd's Avatar
 
Join Date: Mar 2008
Location: Vancouver WA
Default

Quote:
Originally Posted by Harlard View Post
Dude the thing spools up so well. From what I could see, boost was already at 7 psi by 2500 in 2nd gear!

Ps does it have the colder plugs in it yet?
Yeah I'm pretty impressed with how low this thing starts making boost. I have 92oct in the tank now. I still have a vac leak or something else going on. AFRs swing from 13 to 17:1 at idle and low load. I replaced the lh o2 sensor, no change. Runs a touch lean in open loop at about 15:1 but its consistent. Even driving the AFRs look better with the o2 sensor unplugged than when plugged in.

I'm running 10psi now and it's making boost at as little as 2k rpm and its at 10psi around 2,800 depending on the gear. Doesn't really start to pull until about 3500 though. Seems to Rev out about as well as you can expect an 8v with a B cam to.

Yes I installed some BPR7ES plugs.




I did the oil drain different than pictured earlier in the thread.

This is what is at the block.

3" downpipe to 2.5" exhaust.



Last edited by Jerd; 06-11-2021 at 09:04 PM..
Jerd is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 02:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.