• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

1041 axle in early volvo 240 (1030)

ottomotto

Member
Joined
Oct 21, 2020
Hi guys!

Who knows is it possible to swap bolt on the 1030 axle from early volvo 240 to 1041 axle from volvo 940?

Who did such swap?

Thanks.

Regards
 
It's wider and has different mounts. Not a bolt in affair.

What is the reasoning for a 1041 and not a 1031 or just the 1030 you have?
 
because recently saw 1041 from 940 with G80 for sale ad and thought of a swap, but thanks to you I guess I will pass
 
I was thinking of G80 but I doubt it because where I'll buy the new clutch plate kit? They are not produced anymore.
Most of G80's have much wear and won't last long.
 
G80's have metal clutch plates in them with interlocking surfaces
. What I've seen break is the little gear on the paw thing then it won't ramp up and lock, fyi.....
 
Yeah in other words, it's the actuator that breaks. Not the clutches. And if you are drag racing it will be OK, but if you are road racing, drifting, daily driving, almost everything else, that locker isn't the best thing in the world. You won't be missing much.
 
Back
Top