t8fanning
8v are still cool, right?
- Joined
- Oct 10, 2010
- Location
- Vancouver, WA
I've searched, and found a few solutions to adapt the Volvo 850 TPS to a 240 throttle body, but I was unhappy with all of them. So I made my own.
Designed it and came up with this. I 3D printed it for easy testing:
Then I made this:
Here it is in action:
I think it turned out pretty well, and will work just fine. At first I was worried about the heat and a 3D printed part, but I think if I printed it with ABS it would work. So if anyone wants to try a 3D printed one, let me know.
Designed it and came up with this. I 3D printed it for easy testing:
Then I made this:
Here it is in action:
I think it turned out pretty well, and will work just fine. At first I was worried about the heat and a 3D printed part, but I think if I printed it with ABS it would work. So if anyone wants to try a 3D printed one, let me know.