77volvo245
Well-known member
- Joined
- Apr 26, 2007
- Location
- Portland Oregon
Looks like you bought the wrong oil pan? The 302-2 is a lot longer than the 302-1 would fit without cutting the crossmember
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
Looks like you bought the wrong oil pan? The 302-2 is a lot longer than the 302-1 would fit without cutting the crossmember
Got it running and idleing. Stock 240 rad does ok at idle with the fan on low on a stock truck thermostat. Also got the alt hooked up and as soon as I did my fueling req on the entire map almost doubled. When I first fired it I was about to rev cleanly up with no issue.
Now ive doubled to fuel in the whole map and it barely revs past 2k rpm without breaking up from being lean. Ive also nearly maxed out the VE table in a few places just idleing and revving.
When I get home Im going to try and load the initial base map that came with the gold box to try and start over. Very lost what would cause this **** revving.
Would love to see this thing in person. This is the same direction I'm heading going.