Tfrasca
Active member
- Joined
- Apr 20, 2015
- Location
- Ben Lomond, CA
Are you using the 960 TB? It?s been a few years but I feel like I tried to wind the spring an extra turn and for some reason it didn?t want to work? I might need to try it again.
I wound my 960 spring a turn. Or maybe it was a 1/2 turn, then flipped something around? It's been a while since I've even seen the car. But on my 8-valve setup, I put a helper spring from the Yoshifab throttle pulley tp the manifold and that helped a bit.