Noticed a puddle this evening after a drive, and found the coolant hose running into the block under the intake manifold between cylinders 3 & 4 has a crack on the top. Coolant was shooting out and landed on the rear part of the valve cover and head mounted distributor.
I've tried to find a decent heating/cooling diagram to help me figure out which hose I need to buy and replace but haven't had any luck.
Does someone know where a decent diagram can be found so I can I.D. the hose?
Car is an '87 745 Turbo, M46 if that affects things.
I've tried to find a decent heating/cooling diagram to help me figure out which hose I need to buy and replace but haven't had any luck.
Does someone know where a decent diagram can be found so I can I.D. the hose?
Car is an '87 745 Turbo, M46 if that affects things.