home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 01-22-2018, 03:48 AM   #1
MadDog_945
Våga Vägra 8V
 
MadDog_945's Avatar
 
Join Date: Apr 2006
Location: Lower Saxony
Default 16v Turbo EZK Bin files

Hi, does anyone have some tuned EZK bins in their lockers?


I believe i fried my Ostrich/Bin due to an interchange on the batterie terminals with a carcharher for just a second.. must have been enough to flush the SRAM of that Ostrich... its my first guess, so i hope i can just load a new bin into the ostrich and everytrhing is fine again.

I have 012AMM 630cc 102Octane in my LH and now just need a matching EZK ign. curve. Would be awesome, thx !
MadDog_945 is offline   Reply With Quote
Old 01-22-2018, 04:01 PM   #2
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

I got stock ones.

And tunerpro XDF file for tuning it yourself..
Attached Files
File Type: zip Volvo EZK 208.zip (1.3 KB, 20 views)
File Type: zip Volvo_EZK_208-beepee-v4.zip (2.3 KB, 12 views)
__________________
1988 245 White slicktop M47 Wagon! 93 b230f. LH 2.4 STS flat flywheel.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 548K
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.
1995 940 White racing wagoon. 13c m90 to put in

Last edited by sbabbs; 01-23-2018 at 03:08 AM..
sbabbs is offline   Reply With Quote
Old 01-23-2018, 03:09 AM   #3
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

Bump added Tunerpro XDF to tune it yourself. Are you tuning it while driving around with the ostrich at all? If so you should already have the tunerpro XDF file. Unless your using some other program. What are you doing? Just driving around with ostrich with bin loaded up on it is all? I could program up a chip for you also if you want after you get the tune you want.
sbabbs is offline   Reply With Quote
Old 01-23-2018, 03:58 AM   #4
MadDog_945
Våga Vägra 8V
 
MadDog_945's Avatar
 
Join Date: Apr 2006
Location: Lower Saxony
Default

I pretty much failed with a backup here.. ;)

A couple of years ago i tuned my car together with a guy around Berlin. We tuned with 2 ostriches ECU and EZK simultaneously and the tuning was pretty good.. he then burned me a chip for my ECU and my EZK was driven with that tune on the ostrich.. it worked well until now, where my dumbass pressed the reset button ^^ now i have nothing left cause all the tuning stuff is on the laptop from my ex GF and so on.. i pretty much grabbed into a ****hole here :D

i prepared an old aspireone netbook to work with tunerpro5 cause als the new stuff wont work missing .dll errors and non functioning USB drivers :/


Thx for the files.. i even could not get ahead of tose cause my account on ecuproject was refused and jetronic.info is down ;)
MadDog_945 is offline   Reply With Quote
Old 04-24-2021, 04:49 PM   #5
volvoyota
Newbie
 
Join Date: Jul 2019
Location: California
Default In need of Bins

Does anyone have bins and xdf's that used to be on ipdown?
volvoyota is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 04:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.