VB242
I.M. Weasel
- Joined
- Sep 21, 2011
- Location
- Driving the No Malarkey Bus
I know there was just a thread about this but I can't find it. I have power going to the gauge, when I hook up the one terminal on the sender the gauge jumps a little then sits on 0 psi. If I put it on the other terminal it pegs out below 0, could I have the power reversed? I got the gauge and sender from pick and pull so I don't know if the wiring is factory. I have + going to blue/ red wire and - to the black wire and green coming from the gauge terminal.