• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

16V Pistons & Rods

If you go with those pistons you'll need to get crank steered rods or have spacer bushings made for the wrist pin and pin boss.

The setup from yoshifab is pretty solid for the price, and there's no guess work.

There aren't any solid VW lifters that work in a 16v head to my knowledge.
The 16v VW hydraulic lifters are often used in the b234 head. Don't use the diesel ones unless you like metal fatigue and lifter failure.
 
Back
Top