home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications > aftermarket engine management

Reply
 
Thread Tools Display Modes
Old 01-31-2022, 02:10 PM   #1
Truebeliever
Board Member
 
Join Date: Aug 2018
Default ms3 hallsensor resistor

I'm currently building a harness to take it from lh2.2 to ms3. I've been referencing this thread http://forums.turbobricks.com/showth...ht=hall+sensor and a few others, it looks like I need to put in some resistors for the hall sensor circut.

I've seen 1k, 10, and 370 ohm thrown in various threads.

Just trying to get a little clarification if this is still what I should do.
Truebeliever is offline   Reply With Quote
Old 01-31-2022, 05:20 PM   #2
rb92673
Board Member
 
Join Date: Jan 2017
Location: San Clemente
Default

Quote:
Originally Posted by Truebeliever View Post
I'm currently building a harness to take it from lh2.2 to ms3. I've been referencing this thread http://forums.turbobricks.com/showth...ht=hall+sensor and a few others, it looks like I need to put in some resistors for the hall sensor circut.

I've seen 1k, 10, and 370 ohm thrown in various threads.

Just trying to get a little clarification if this is still what I should do.
I used a 1k for my Microsquirt for the hall sensor in the LH 2.2 distributor.
rb92673 is offline   Reply With Quote
Old 02-01-2022, 10:18 AM   #3
bobxyz
Board Member
 
bobxyz's Avatar
 
Join Date: Aug 2014
Location: Boulder CO
Default

Yes, 1K (1000 ohms) to +5volts is normal. If you're good at soldering small parts, the resistors can be added to the connector pin stubs within the MicroSquirt box.
bobxyz is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 09:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.