CAPT_BLOTTO
#Crush It
- Joined
- Jul 19, 2005
- Location
- Kansas City
I'm having an issue with getting a good coolant temp sensor reading. I get -18? while it should be around 70?. I did overlays, ABA swaps between sensors, and measured the parts directly. After a lot of trouble shooting I found that with the ezk unplugged I get a good reading.
So my question is for MS does EZK just give engine speed output? Does it need a coolant input since MS is now handling ignition? Or is the EZK still handling some with not having COP and the stock distributor.
Or does anyone know what could be causing these issues?
So my question is for MS does EZK just give engine speed output? Does it need a coolant input since MS is now handling ignition? Or is the EZK still handling some with not having COP and the stock distributor.
Or does anyone know what could be causing these issues?