doucheNozzle
Newbie
- Joined
- Feb 26, 2009
- Location
- The Pitt, 15147
Almost looks factory
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
Does your speaker set up interfere with that dash grab handle at all? I had one on my dash, and with the bne 5.25 speaker grills installed I couldn?t close the door without the grills hitting that handle, I had to remove it. If they were just a few hairs more shallow it would be fine.
Does your speaker set up interfere with that dash grab handle at all? I had one on my dash, and with the bne 5.25 speaker grills installed I couldn?t close the door without the grills hitting that handle, I had to remove it. If they were just a few hairs more shallow it would be fine.
Nope, mine cleared fine.
On the upside, the sound deadening makes a massive difference in how the doors sound.
Then I epoxied the parts together and hit it all with SEM trim black. It looks great to me, and clears the mirror hardware no problem.
Clarion support says there may be an issue with the head unit. Hopefully a firmware update takes care of it, but if not it'll have to go back and be swapped out. Really hope the firmware update gets it working.
What's the issue?
Subwoofer isn't playing. The amp turns on, I've swapped RCA cables, and the sub output is on in the radio menu. The subs worked with the head unit I took out.
I just didn't have time to really troubleshoot it last night.
My sub amp has a feature to turn on when it sees an audio signal, and if I set it to that, the amp doesn't turn on, so I can only assume there's no signal coming out of the head unit.
I can apparently play a test tone and check for AC voltage on the RCAs when I get back too.
Sounds like it's an issue with the RCA outs but out of curiosity, is there a sub volume control? Is it way low?