Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Hello Guest, welcome to the initial stages of our new platform! You can find some additional information about where we are in the process of migrating the board and setting up our new software here
but im to much of a cheep skate to buy them:lol:
<iframe width="560" height="315" src="https://www.youtube.com/embed/fmZvGv3xYIY" frameborder="0" allowfullscreen></iframe>
<iframe width="560" height="315" src="https://www.youtube.com/embed/rp0aVrLY-dk" frameborder="0" allowfullscreen></iframe>
Hello, I was told that some people have used gm bulb sockets to hard wire there 240 tail lights? Anyone have any pictures of the sockets used or final installation?
Does anyone know or have a picture of where volvo 240 side markers passed through to connect to the turn signal wiring? I'd like to add mine but would rather not drill if I don't have to.
Well I originally picked up this car for myself a year ago. Its what most people would want in a 240, black on black with an unheard of 60,000 miles. I picked up the car In NJ, The car was in a small accident. The car needed a new hood and core support, I was told the car was rust free...
I'm in the process of moving my brake fluid reservoir to make room for my strut brace. I just read hydraulic, coolant, fuel, oil, ect hose will not accept brake fluid. Any idea what can be used? I need both 1/4" and 1/2".
<a...
snapped a few pics today, happy with how its turning out having owned it just a year!
<a href=http://s265.photobucket.com/albums/ii234/2fast242gt/?action=view¤t=20140713_150116.jpg target=_blank><img src=http://i265.photobucket.com/albums/ii234/2fast242gt/20140713_150116.jpg border=0...
what chemicals would you guys recomend to take off this old glue and dirt??? I already degreased and power washed it along with scrubbing with a bristle brush.
<a href=http://s265.photobucket.com/albums/ii234/2fast242gt/?action=view¤t=20140706_141654.jpg target=_blank><img...
Hello guys! im wondering if any of you are interested in meeting up this year and doing some drag racing? WIR in kaukauna is only $25 and you can race as many times as you wish against whoever you wish! seems like it would be a fun day for all of us, I have personally raced there once and it was...
With my current wheel and brake setup I have about 1mm caliper to wheel clearance. What's acceptable ? I read 3mm? Ill check later to see actual clearance bit its tight. This picture makes it look worse than it is due to the angle. How much can be removed from calipers? Paging daves40!
<a...
I raced the first time last night. It was an absolute blast to do! I feel i did great considering im on 10 year old dry street tires... yes ten years old... stupid I know but they were cheep... I feel I would easily have a 12.5 with good drag radials. setup and specs are in my build thread, 1st...
So what happens is the wipers will run in acessory (bearly) nothing at run, I swapped the stalk for a kbow good one from my 242. And changed the relay, any idea what's going on?
http://youtu.be/D28cbE86LMU
Who has all had this problem? Before I had the car painted I took off the original door and replaced it for this reason. Now the replacement door has cracked after being painted of course...
<a href=http://s265.photobucket.com/albums/ii234/2fast242gt/?action=view¤t=20140513_130518.jpg...
Its been a pain staking long detailed process but I think its paid off! its been a long winter and allot of hard work has taken place in swapping shells (The full banana's) current pimp mobile to this clean 83 shell with no sunroof. I have been working on it almost every spare hour I have. Its...
The system was dry over winter. Anyways I have a new master and low mikae calipers on the car. With my power bleeder hooked up I get clean air free fluid from each caliper. The pedal is spongy at best with the car off. If the car is running I can press the pedal right to the floor. Thoughts? I...
So I swapped out my broke odometer speedo for one with good gears yesterday, instead of fixing the odometer I lost my speedometer... everything is hooked up correct and I've tryed two seprate speedo's.
I do question this connection though. There are 4 prongs on the bord but only three on the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.