hessam69
Well-known member
- Joined
- Jun 19, 2009
- Location
- Sydney, Australia
I carried out an accumulator mod where the shims I made were almost (very close to) the same height as the springs.
The shift is now perfect in all gears, but the by-product is the very hard shift from neutral to drive.
1. Is there damage to be had long term from this,
2. How can I eliminate this harshness whilst still keeping the gear shifts the same? I don't want that to change.
Thanks in advance
The shift is now perfect in all gears, but the by-product is the very hard shift from neutral to drive.
1. Is there damage to be had long term from this,
2. How can I eliminate this harshness whilst still keeping the gear shifts the same? I don't want that to change.
Thanks in advance