mojopwr
Member
- Joined
- Apr 1, 2005
- Location
- indianapolis
Do these have no retainer or is this a defect?
Working on an automatic to m46 swap. Figured out that the clutch fork is too far from the slave by firing the piston out. I'm surprised that there's no retainer and no groove in the cylinder for one, so only the boot and the fork hold it together. Is this normal?
Working on an automatic to m46 swap. Figured out that the clutch fork is too far from the slave by firing the piston out. I'm surprised that there's no retainer and no groove in the cylinder for one, so only the boot and the fork hold it together. Is this normal?