- Joined
- Jan 23, 2003
- Location
- Charlotte, NC
I wish someone liked to make 700's stop...
Eamonn
Eamonn
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
Could you just run the ABS type master cyl?ashvolvo said:The second line to each wheel should be plugged at the distribution block.
Nick said:I was just trying to clarify, dont flip out man. I know what materials and workmanship cost, and this is a good value considering the 129 is in aussie dollars. I guess I should rephrase: are there any other specific parts required that come in the kit?
ravennexus said:have your thought of not running a hardpipe to the strut so that if you need to remove strut you dont' need to disconnect the caliper.
maybe a hose holder on the strut so you can clip the rubber hose to it.
mikep said:You shouldn't need more than a 21mm bar or a 25mm hollow bar with that linkage.
Looks very nice. I need some of those clamps.
ravennexus said:likely stopping distances wont' change much as such things are dependant on tyre grip and such what should change is short term repeatability, IE how soon you can repeat that 100mph to 20 stop due to the bigger disk area for heat abosrbtion/disipation.
Nick said:Thats a great looking setup. I especially like the backing plates w/ venting. Has anyone got a running car w/ these brakes that can comment on how well they perform? Any stopping distance numbers? Also, whats the estimated time before you'll be ready to sell these?
Wow. So are these swaybar adapters just using stock 240 bars with the ends cut off so they'll fit through that hole? Or are they some sort of universal custom bar? That's pretty awesome either way.mikep said:In other words, you double the effectiveness of the bar by moving the attachment point from the control arm to the strut.
The Aspirator said:Wow. So are these swaybar adapters just using stock 240 bars with the ends cut off so they'll fit through that hole? Or are they some sort of universal custom bar? That's pretty awesome either way.
PS Ash your website doesn't seem to be working at the moment.
Captain Bondo said:I gotta say, the strut mounted swaybar endlink is baddass.
Seriously man kickass.