Ursan
Bored Member
- Joined
- Jun 14, 2004
- Location
- Satan's Kingdom, Ma.
If any link is broken, please let me know, until then please go to my PhotoBucket 780 Project Page
My 780 headlamp mod thread My Mod Thread
Started the project last year actually just gathering parts. Started putting it all together the middle of June. Lots of setbacks (oh, so many setbacks) Rain mostly.
I'm just hoping for somewhere in the area of 250-275HP. Nothing extreme, just drivable enjoyment.
If anyone has suggestions, I'd like to hear them.
Now, if I can just finish the projector lamps...
Basic updates:
Rear Sway Bar Install
Painting
New Grille
S.A.M. Strut Tower Brace
Side Marker Install
AC condenser fan ALA Mr. Bill
RSI stage 1 cam with RSI adjustable cam sprocket currently @ -2?.
New front cam belt cover. (Mine disintegrated into dust, literally)
"New" Turbo T3 .48 A/R I bought about 10 years ago, but only used for a summer.
Ported 90+
Mikes Chips (Injection & ignition)
4 flow matched 52#/576cc model INJL55 injectors from Racetronix
External CBV (Forge)
3" intake
3" 012 AMM
Airaid AA720-431 air filter http://www.airaidsales.com/AirAid-Universal-Air-Filters-PRD9.aspx Tucked up behind the bumper
under the passenger side headlamp.
ATP UIWG Ultimate Internal Waste Gate (3" outlet)
NPR Intercooler
Volvo 2 speed electric fan mounted in the stock mechanical fan shroud with 2-speed relay. Low speed side in the radiator using the
"over heat" port. High speed control will be in the upper radiator hose.
3" turbo back exhaust custom made.
VDO OIL 80PSI pressure gauge and sender.
VDO Oil temperature gauge. Sensor will be installed in the big assed banjo bolt for the oil filter relocation arm.
AEM Wideband
G-Valve
Pics:
780 Project Gallery
Last edited: